My lovely sister wanted me to make this diy for her, so I happily said yes and of course had to share it with you guys! This diy was pretty easy to do, although it may look very intimidating.
We scored this wood piece at Goodwill for a dollar. We cut out Indiana on her cricut, along with the heart and then I taped the Indiana cutout in the center of the wood piece and then hammered the 1 x 17 wire brads around the cutout. This actually went by pretty quickly once I got in the rhythm.
After I hammered the wire brads around the Indiana cutout, I then pulled off the cutout and placed the heart down and did the same as I did for the Indiana cutout.
Once that was all done, I used white string and just looped from one wire brad to the heart. You can use any technique to get a different look.
That’s all there is to it! I’m so happy with the way it turned out and glad it didn’t take as long as I thought it would.
Most importantly, my sister loves it and that’s all that matters to me really. What do you think of the state string art? Have you made something similar? I’d love to know! As always, thanks for stopping by!
The post DIY State String Art appeared first on DIY Magazine.